- RED DOOR
HOME PAGE - PANORAMIC VR
TRIPOD HEADS - PANO POLE
SYSTEM - PROMOTE
CONTROL© - GIGAPAN
SYSTEMS - 360º OBJECT
TURNTABLE - PANORAMIC
PHOTO GUIDE - EQUIPMENT
HIRE - ACCESSORIES
& SPARES - VR SOFTWARE
APPLICATIONS - OFFERS &
DEALS - VIEW
BASKET
Features 2 x Mecha E1 Rotators and 2 x C1 Controllers wirelessly linked.
Robotic Pano head: NN3 MKIII | Mecha E1 | Controller C1
Dual-Axis MECHA Panoramic Tripod Head is HERE
Finally a compact and affordable "dual-axis" pan tilt head solution. Based on the popular tried and tested Nodal Ninja NN3 MK3, fitted with 2 MECHA E1 Rotators and 2 C1 Controllers which are wirelessly linked together.
Use as a single-axis horizontal rotator single row shooting or use as a dual-axis rotator for both horizontal and vertical movements.
The MECHA E1 and C1 being modular in design will be compatible with future Mecha rotators and controllers paving the way for future low-cost upgrade paths.
This setup supports a camera/lens up to 1.25kg (2.75 lb) and NPP ('No Parallax Pont') up to 110mm from the pivot point making it ideal for mirror-less, compact and lighter DSLR cameras. Easily shoot 360° panoramas or even high-resolution gigapixel images.
Kit Includes:
2 x Mecha E1 Rotators
2 x Mecha C1 Controllers
NN3 MKIII Panorama Head with Nadir Adapter
Optional 1.2m Long Shutter release cable compatible with Dual-Axis Mecha
Case
Misc spares.
Photo: Nodal Ninja C1 controller:
Lower rotator supports 2kg, including panoramic head.
The Mecha E1 is Compact and lightweight for the load rating
Total weight of Mecha Rotator E1 + Single Axis Controller C1 approx. 500g.
The E1 motorized rotator head will support up to 4.4bs (2kg), including panohead. For use with NN3 MKII, NN3 MK3, R1, R10, R20, RS1, (heads sold separately). MECHA is lightweight, quiet and power efficient. Together with the Single Axis Controller C1 (F9910), it automates the panning axis of Nodal Ninja R1/10/20 series as well as the Nodal Ninja 3 MKII and MK3 and the RS1.
The Mecha E1 is NOT recommended for larger Nodal Ninjas (NN6 and M Series) - See details of the Mecha E2 for compatbility with lather pano heads and heavier cameras.
Supports one Mecha rotator.
Compact controller with built in battery and charger.
Two NCR18650GA 7.2v 3300mAh high capacity batteries.
WIFI remote control for smartphones, tablets, PCs by using simple web page interface.
Supports linking and controlling multiple controllers via WIFI, connection via a wifi access point, over the air firmware upgrade and remote control over the internet.
Can run presets stored in memory, configured via the web page inteface.
5 LEDs to indicate battery capacity remaining.
CAM port with opto-isolated trigger for focus and shutter release.
Features a Multipurpose 'AUX port' (ready for future firmware upgrades) for shutter confirmation, Radio Start/Stop remote trigger, wired Start/Stop trigger or IR remote etc.
Photos: Mecha E1:
Choosing a cable - check the recommended cable model numbers with the manufacturer of your camera.
Images below show a selection of connector types for reference only.
