Red Door VR Limited UK
Nodal Ninja Pano Pole system - accessories and parts.
Pano Pole Rotator

Pole Rotator, 30 degree increments.

This is a sealed, compact, low cost pole rotator with detent strength optimized for use with the Nodal Ninja Pano Pole kits.

This model has 30 Degrees and 12 click stops per revolution.

Product Code: P-R-30 £39.95 (£47.94 inc UK VAT)


Pano Pole Rotator

Pole Rotator, 36 degree increments.

This is a sealed, compact, low cost pole rotator with detent strength optimized for use with the Nodal Ninja Pano Pole kits.

This model has 36 Degrees and 10 click stops per revolution.

Product Code: P-R-36 £39.95 (£47.94 inc UK VAT)


Pano Pole Rotator

Pole Rotator, 45 degree increments.

This is a sealed, compact, low cost pole rotator with detent strength optimized for use with the Nodal Ninja Pano Pole kits.

This model has 45 Degrees and 8 click stops per revolution.

Product Code: P-R-45 £39.95 (£47.94 inc UK VAT)


Pano Pole Rotator

Pole Rotator, 60 degree increments.

This is a sealed, compact, low cost pole rotator with detent strength optimized for use with the Nodal Ninja Pano Pole kits.

This model has 60 Degrees and 6 click stops per revolution.

Product Code: P-R-60 £39.95 (£47.94 inc UK VAT)


Quick Mount Mini Adapter System for Pano Pole.

Quick Mount Mini Adapter System for Pano Pole.

Mount your NN3/4/5 or R1/R10 to the Pole system or Fanotec advanced rotators quickly and easily with the Quick Mount Mini Adapter System. Includes clamp, fitting kit and 3/8" plate.

Product Code: P-QMAS £32.95 39.54 inc UK VAT)


Carrying Case for Nodal Ninja Pole Series 1

Carrying Case for Nodal Ninja Pole Series 1

Made of polyester linings with thick padding, it is very tough and offers excellent protection for the content inside, while at the same time being easy to clean.

This case is designed to store Pole Series 1 complete unit with extra accessories installed. It is long enough to store an R1/10, Quick Mount Mini Adapter, Pole 1, rotator and footplate as one piece (attached footplate may protrude slightly). There are 2 compartments for storing extra items, such as rotator and footplate. The compartments are even big enough to store a Nodal Ninja NN3 or even NN6! Inside there are Velcro straps to fasten the pole securely during transport. Made of polyester linings with thick padding, it is very tough and offers excellent protection for the contents inside, while at the same time being easy to clean.

Specifications:

Length: 1.36m / 53.5"
Material: Polyester
Supports: Nodal Ninja Pole Series 1

Product Code: P-CASE1 £34.95 41.94 inc UK VAT)


Carrying Case for Nodal Ninja Pole Series 2

Carrying Case for Nodal Ninja Pole Series 2

Made of polyester linings with thick padding, it is very tough and offers excellent protection for the content inside, while at the same time being easy to clean.

Product Code: P-CASE2 £49.95 59.94 inc UK VAT)


Tripod Adapter Clamp Kit Type B
TYPE B

Tripod Adapter Clamp Kit Type B for Pole Series 1 and Pole Series 2

This adapter kit spreads the bending torque over the length of the tripod centre column, greatly reducing the torque at the tripod top disk, rotator and pole base. This adapter is best suited for Pole Series 1 and Pole series 2 "upper".

The tripod adapter clamp kit TYPE B is suitable for tripods with a centre column diameter of 32mm, 28mm and 26mm using the adapter sleeves supplied. The bottom clamp fits around the outside of the bottom of the tripod centre column. This adapter will also work with Manfrotto tri-facet style centre column.

Product Code: P-TA-B £49.95 59.94 inc UK VAT)


Tripod Adapter Clamp Kit Type B
TYPE A

Tripod Adapter Clamp Kit Type A for Pole Series 1 and Pole Series 2

This adapter kit spreads the bending torque over the length of the tripod centre column, greatly reducing the torque at the tripod top disk, rotator and pole base. This adapter is best suited for Pole Series 1 and Pole series 2 "upper".

The tripod adapter clamp kit TYPE A is suitable for tripods that have a 3/8" male thread on top and a 3/8" female thread at the bottom of the center column - the bottom clamp screws into the thread in the bottom of the tripod centre column. The adapter spreads the bending torque over the length of center column, greatly reducing the torque at the tripod top disk, rotator and pole base. It works with Fanotec advanced rotators, pole rotator and Fanotec poles.

Not compatible with all tripods. Does not fit Manfrotto 190XB series or tripods with small diameter center columns.

Product Code: P-TA-A PRICE DEAL: £39.95 47.94 inc UK VAT)


Tripod Clamp Kit for Travel Pole
TYPE B FOR TRAVEL POLE

Tripod Adapter Clamp Kit for the Travel Pole

This adapter kit spreads the bending torque over the length of the tripod centre column, greatly reducing the torque at the tripod top disk, rotator and pole base. This adapter is exclsively for the Travel Pole.

The tripod adapter clamp kit is suitable for tripods with a centre column diameter of 32mm, 28mm and 26mm using the adapter sleeves supplied. The bottom clamp fits around the outside of the bottom of the tripod centre column. This adapter will also work with Manfrotto tri-facet style centre column.

Product Code: TP-TA £49.95 59.94 inc UK VAT)


pole rotator footplate
Pole, footplate and RD5

Rotator Footplate

The foot plate adds an anchor to base of the pole.

Can either be used with the Nodal Ninja RD5 Rotator or the new smaller Pole Rotators seen above and as shown in the top image alongside.

(Note that when used with the RD5 rotator this is mounted 'upside down' as shown in the lower image alongside)

This item is the footplate only, rotators not included.

Product Code: P-FP £39.95 47.94 inc UK VAT)


Advanced External Level for Fanotec  Poles

Advanced External Level for Fanotec Pole System 1 and Travel Pole

Features: integrated dust cover / mirror for convenient view angle unique level gauge design to allow accurate reading.
Compatible with Travel Pole, Fanotec Series 1 and can be used on Pole Series 2 (Mounts to UPPER Unit ONLY on Pole Series 2)

Extremely useful, particularly when using the pole manually as 'monopod/monopole' with footplate.

Product Code: P-TP-AL-S1 £22.95 27.54 inc UK VAT)


Advanced External Level for Fanotec  Poles

Advanced External Level for Fanotec Pole System 2

Features: integrated dust cover / mirror for convenient view angle unique level gauge design to allow accurate reading.
Compatible with Pole Series 2

Extremely useful, particularly when using the pole manually as 'monopod/monopole' with footplate.

Product Code: P-TP-AL-S2 £24.95 29.94 inc UK VAT)


Pole KIt 2 - spirit level

Standard External Level for Fanotec Pole S2 - Series 2

Optional spirit level for accurate levelling of pole. Big and bright vial for easy viewing. The level is clamped to the lower, largest diameter section of the Pole Series 2.
Extremely useful, particularly if using the pole manually as 'monopod/monopole' with footplate.

Product Code: U-P-L2 £19.95 23.94 inc UK VAT)


 

 

 

 

Prices and product specifications are subject to change without prior notice. The photographic product images on this web site may not exactly reflect the product you receive. Design revisions, updates, improvements and colour variations may exist E & OE.
Red Door VR Limited, UK - Panoramic Photo Equipment Specialists - pageloads from 111107: