For your Nodal Ninja VR head - this low profile Quick Release System allows your camera to be taken on and off quickly while maintaining a reproducible position on Nodal Ninja's. Includes clamp item# QRC2 and plate item# QRP2.

QRC2 Clamp:
The clamp includes an integrated rail plate to allow mounting directly to the Nodal Ninja rail system.

QRP2 Plate:
The plate mounts to the base of your camera. Incorporated into the plate is a 10mm offset for battery grips (as with some Canon Grips) where the tripod mount is not centered with the barrel of the lens.

QRS2 Quick Release System includes:
Material: Aluminum with cork base
Not including level measures: 2.4" x 2.6x .7" (61.3mm x 66.4mm x 17.8mm)
Thread mount: 3/8 and 1/4 inch with various offsets
The clamp includes an integrated low profile rail plate to allow mounting directly to the Nodal Ninja rail system.

item# QRP2 Quick Release Plate:
Material: Aluminum with cork base
Measures: 2.4" x 1.9"x .4" (61mm x 47.4mm x 10.5mm)
Thread mount: 1/4 inch slotted screw
Offset: 0-15mm

Combined Totals:
2.4" x 2.6" x 1" (61.3mm x 66.4mm x 23mm)

The new low profile Arca Style Clamp is compatible with the Arca style systems.

Includes 1 x Arca Style Plate (ASQRP see below).

Arca Style Quick Release Clamp and Plate system for Nodal Ninja NN5/NN5L NN180 Heads (NOT NN3 models)

Plate - View of underside

Plate - View of top

The new low profile Arca Style Plate mounts to the base of your camera.

This plate can used with the Arca Style Clamp (ASQRC - see above) and/or most Arca Style Clamps for mounting in a reproducible manner.

Incorporated into the plate is a 10mm offset for battery grips (as with some Canon Grips) where the tripod mount is not centered with the barrel of the lens.

View of top

Material: Aluminum with doubled sided quality cork base
Measures: 48mm x 46mm x 7mm
Thread mount: 1/4 inch screw
Includes: 1/4" Camera Mounting Knob with shorter length threads (5.5mm)

Note that the QR rail plate is ONLY recommended for QR systems with lever lock. It is NOT compatible with Nodal Ninja Arca Swiss Style QR Clamp with screw knob.

Material: Aluminum with doubled sided quality cork base
Measures: 48mm x 46mm x 7mm
Thread mount: 3/8 inch screw

New T-30-II (2nd generation) T-adapter. This newer T-adapter has a 30mm offset designed primarily for point and shoot cameras where the tripod mount is offset from the center barrel of the lens.

Features include adjustbale rail guides to prevent camera from twisting and scale stop to remember offset position. Hex key included to set initial mount and extra screws and guides also included.

See our handy guide and video 'T-Adapter How it works' and instructions.

Camera mounting knob, Vertical rail mounting knob and Upper rotator tensioning knob.

Sold as a spares set only - not available individually.

NN3/MKII Camera Mounting Knob included with each NN3 MKII.
This knob screws into either the camera mount plate, if attached to camera base, or directly to the camera base using the square rubber washer (with some NN3's).

This is out new Camera Mounting Plate (CP-2). The CP-2 replaces the older CP-1.

CP-2 consists of 2 parts - plate and base. The base mounts allows mounting to the Nodal Ninja the plate allows for anti-twist mounting to camera.

We also include an extra plate with different mounting surface to allow user to select best plate for their camera.

Please see the Quick Reference Guide for this new Camera Plate - click here for pdf.

Already have the Nodal Ninja NN3?
If you bought a Nodal Ninja 3 before the new Hard Shelled Case was available, you can now buy JUST THE CASE to keep your Ninja packed away safe and secure....

NOTE - THE CURRENT MODEL NN3 / MK II KIT SHIPS WITH THIS STYLE OF HARD SHELLED CASE - THESE CASES ARE OFFERED HERE FOR USERS WHO PURCHASED THE NN3 PRIOR TO THE NEW CASE DESIGN OR USERS REQUIRING A SECOND / SPARE / REPLACEMENT CASE.

Upgrade your older NN3 with the new rotator from the NN3 "MKII". This consists of only 2 pieces - upper tension knob and lower rotator knob with spring ball, 1/4-3/8 screw adapter. Greater precision, easier use of handling, rubberized edges, no lock screw, this is certainly a must have!

Note: This upgrade allows the use of your existing NN3 detent rings only.
The MKII detent rings will not work with this conversion.

For shifting the lens in front of the No Parallax Point by 5-20mm.
Features 35mm (1-3/8") diameter ring with 2 mounting screws.

This adapter kits allow for mounting the R1 or R10 onto either our D8 or D16 advanced rotators.

Includes all mounting hardware needed for a quick and easy install.

Nadir Adapter - another new product in the range of Nodal Ninja accessories

Easy to setup and use - first attach to lower end of vertical rail then attach to lower rail of NN3, NN4 or NN5 using the standard vertical rail mounting knob. After you shoot your sequence of shots and ready to shoot the nadir (down shot) simply loosen the Nadir Adapter using locking lever and rotate the vertical rail 180 degrees then tighten. It is good to use a reference point on ground as you will need to move the tripod assembly slightly so the lens is pointed directly over the original point of rotation.

The Nadir Adapter is a must have for anyone shooting an unobstructed down shot, especially important if shooting HDR.

How to use the Nadir Adapter?
Link to Quick reference guide pdf

The nadir adapter allows the user to take sharp nadir (90 degree down) shot quickly. It is as simple as unlocking the adapter, rotating it by 180 degree and locking it again. User then moves the tripod to compensate for the displacement of the camera caused by the rotation of the adapter. Taking sharp nadir shot is then just a matter of pressing the shutter release button.

Moreover, it adds to the height of the vertical rail, providing enough clearance for zenith (90 degree up) shot for many lenses.

Built with the structure of a rotator with fully lubricated bearings, it is sturdy as rock. It is compact and acts as an integrated part of the modular system.

It is a must have accessory for anyone shooting an unobstructed down shot, especially important if shooting HDR.

Flash Adapter - another new product in the range of Nodal Ninja accessories

New NN Flash Adapter - This adapter allows for the use of a flash with flash adapter on Nodal Ninja 3 and 5 series pano heads.

*Requires separate camera flash adapter available from camera manufacturer.

M6 female to 3/8" male thread adapter for advanced rotators.

Converts M6 female to 3/8" male thread.

Includes screw adapter, hex and spring washer.

Note: Install the spring washer with the concave side facing the rotator when fitting to a Nodal Ninja rotator.

Illustration shows adapter fitted to a Nodal Ninja rotator as example of use only - rotator not included!

Nodal Ninja Rotator Handle

Reduces stress on the lens and camera body during rotation, a new accessory handle for the Nodal Ninja advanced rotators. Designed primarily for use with the Ultimate R1/10 heads with Rotator D4, it will also work for Rotator models D8/D12/D16. This handle simply screws directly into one of the unused holes in the advanced rotators.

Customers who selected this item also viewed the following products:
Hot Shoe Twin Axis Bubble Level | EZ Leveller | Camera Remote Control Cable